As an undergraduate, Emanuela Gionfriddo considered joining an organic chemistry laboratory before ultimately choosing analytical chemistry. When the professor learned of her decision, he called her into his office and told her that he never thought she would “waste her life pushing buttons.” The encounter, Gionfriddo, Associate Professor of Chemistry, University at Buffalo, The State University of New York, USA, says, prepared her for a common misconception about analytical science – and she promised herself she would never become the type of analytical chemist people thought only pushed buttons.
Gionfriddo’s research focuses on improving the accuracy of measurements used to find small molecules in complex samples. Her work spans environmental research and is increasingly moving toward questions at the interface with human health.
Here, Gionfriddo discusses what drew her to analytical science, lessons from working across countries and disciplines, and why the next generation still needs to know what is happening behind the buttons – or the screens!
Did you always want to be a scientist?
I always wanted to know how things happen in nature and how things work. That’s what I was passionate about as a child. Later on, I realized that fit the definition of a scientist. I suppose that was a natural progression in my career choices.
What drew you specifically to analytical science?
For some time, I wanted to be a veterinarian just because I love animals. But, and it may seem strange, but I think my personality led me to analytical science – my brain is wired to think very analytically. I also realized later in life that the way I was raised to do chores in a very precise and accurate way well trained me for my work in the analytical laboratory. I was also fascinated by the concept that analytical chemistry allows you to see things your eyes cannot see – to see molecules coming out of food or molecules in water that your eyes and your senses cannot detect.
So, when I had to decide which field of chemistry to choose as an undergraduate, I thought being an analytical chemist made the most sense to me, and felt like the natural progression and development of my personality into my career.
Then, when I started studying chemistry, my organic chemistry professor really wanted me to be in his lab. When that professor learned I had chosen an analytical chemistry lab, he called me into his office and told me he wouldn’t have thought I would choose to “waste my life pushing buttons on an instrument”.
That prepared me to face, throughout my career, one of the main misconceptions scientists can have about analytical science. I felt a little bit bad when he told me that, but afterward I promised myself I would never be the type of analytical chemist people think of as only pressing buttons. Whatever I do, I want to bring it to the next level – not just push buttons. And that’s what I try to teach my students.
Is there a red thread running through your research interests?
The phrase “red thread” makes me something pop into my mind: a needle, because I feel that everything we do is like finding the needle in the haystack.
The big theme of my research is improving the accuracy of measurements aimed at finding small molecules in very complex samples. We want to make chemical analysis easier while maintaining very high levels of accuracy and precision. Depending on the sample you are dealing with, that can be a very challenging task.
Are you driven more by scientific curiosity or by the desire to make an impact?
My opinion is that if you are driven by curiosity and you do your job with ingenuity, passion, and dedication, making an impact is a consequence of that.
I feel that sometimes problems happen in science, but also in many other fields, when you decide that you want to make an impact at all costs. To me, making an impact is a consequence of good work being done.
This impact is not only limited to the research work we pursue as analytical scientists. As an academic, making an impact also means properly training a new generation of analytical scientists.
That said, there are different factors that steered me toward environmental research. I come from a very beautiful part of Italy where nature is wonderful, but it has not always been preserved the way it should. Calabria has beautiful beaches and sea, but I remember that sometimes, when I was a kid, we couldn’t go to the beach because it wasn’t safe due to pollution. As a kid, that annoyed me a lot. But as I grew up, I started thinking, what a pity. We have all these beautiful landscapes, and because of the mismanagement of environmental waste, not only can we not enjoy our land, but this can also cause harm to humans.
That’s why I believe in the importance of environmental monitoring and research. You cannot mitigate a problem – especially a chemical problem – that you do not fully understand. As analytical chemists, our job is extremely important because we are responsible for understanding what is in that water (or any other sample we analyze), and telling people if there’s a risk here. That’s a big motivation.
Where do you think your work could have the greatest impact over the next 5 to 10 years?
There are three areas in which our research could make an impact.
One area is regulatory methods. When developing an analytical method, our primary goal is to ensure that it is fit for purpose and meets the required performance criteria. At the same time, we strive to simplify the analytical workflow, particularly the extraction and sample preparation steps, to increase throughput while maintaining the necessary sensitivity and levels of accuracy and precision.
In the regulatory field, these approaches have the potential to streamline routine analyses, increase throughput, and potentially improve analytical performance compared to existing methods. One of my long-term goals is to see regulatory agencies draw inspiration from the methods and technologies we are developing and eventually incorporate some of these advances into fully validated regulatory methods.
Another area involves understanding how certain materials can isolate and concentrate pollutants. We are currently conducting extensive research on PFAS, and my hope is that the fundamental processes we are investigating will eventually contribute to practical solutions, whether by advancing large-scale remediation technologies, enabling the development of more efficient household water filtration systems, or inspiring the design of novel separation phases for analytical applications.
I also hope the fundamental studies we are doing on materials today will be useful tomorrow if another class of molecules comes into the spotlight. We never know what the “hot contaminant of the day” will be in 5 or 10 years. By understanding how a material fundamentally behaves, we can better evaluate whether that material is fit for purpose for certain classes of molecules.
The third area is understanding broadly how small molecules and contaminants interact with biopolymers and synthetic polymers in the environment to regulate processes such as bioaccumulation or environmental mobility. We are working on understanding the molecular drivers of those interactions.
I hope this research can help scientists understand whether certain molecules should be banned because their interactions could be harmful to ecosystems or make them too persistent in the environment. It could also inform the development of new synthetic polymers – plastics or fibers for clothing, for example – by helping us understand how their chemical makeup could be improved to avoid concentrating potentially harmful molecules that can be stabilized by the interaction with these materials.
I hope those are three big areas where my research can bring one of the pieces of the puzzle that the scientific community is trying to put together.
Do you have any advice for a successful interdisciplinary collaboration?
I believe it’s important to choose collaborations very wisely, especially for analytical chemists.
I like to choose collaborators who have the same work ethic. You need to align with your collaborator on what is important and how things should be done. The research and the project need to be important to both parties; otherwise, there is going to be an imbalance of priorities. The drive and the pace at which the science needs to be done also need to match between the two groups.
What I love about interdisciplinary collaborations is that I can learn new things. I can learn how a collaborator who isn’t an analytical chemist thinks about a problem from a different perspective. If there is a special need to answer a specific question that isn’t an analytical chemistry question, I can learn how to tune my method to help answer the question my collaborator has. That’s the aspect I enjoy most.
However, as analytical chemists, we need to be aware that many people think we are just “service” scientists. A big red flag for me when discussing a collaboration is: “We just want the results,” or, “We just need you to run 200 samples in a week.”
That’s not the type of collaboration I usually seek. Sometimes you do need to run a lot of samples and understand what is in them, but the dynamic shouldn’t be, “You run the samples, give me back whatever number you get, and I’ll work with it.”
There also needs to be an effort from the collaborator to appreciate and understand how challenging it can sometimes be to adapt a method to a new sample – or how impossible it sometimes is to do what a collaborator wishes.
It isn’t easy to find good collaborators, but when you find them, that’s the most enjoyable experience.
The best collaborators are those I could listen to for hours because I genuinely want to understand their perspectives and the scientific questions driving their research. After all, analytical chemists are problem solvers, right? When someone comes to me and says, “I’m studying a biological system, and there’s a molecule I need to identify to answer a critical research question. How can we approach its analysis?” – that’s where I believe the most exciting scientific innovation happens. It’s when different perspectives come together to tackle a challenge that new ideas and analytical solutions emerge.
This way, I can bring my expertise to solve a problem I would never have thought of without the expertise of my collaborator.
You’ve been willing to move internationally throughout your career. Was that something you always imagined yourself doing?
Honestly, no. I was extremely comfortable where I lived in the south of Italy, with good weather, good food, and the love of my family. If you had asked me probably 20 years ago, I would have said, “No, why should I move?”
But then there was an opportunity to do an international research experience abroad that came while I was doing my PhD, and I took it.
What was originally intended to be a short research stay turned into a permanent move, taking me across the Atlantic and opening an entirely new chapter in my life and career.
I embraced what was happening to me and the opportunities that came my way. I didn’t plan it; but I didn’t resist it – I just went with the flow.
What have those different countries and research environments taught you about how to do science?
I’ve done research in Italy, Canada, and the United States, and I could never have imagined that moving from one country to another could make such a difference in the way scientists behave and approach science.
I always thought science was a universal language. Chemistry is chemistry. That molecule is that molecule no matter what language you speak. But I realized different countries have different approaches to scientific research and to training young scientists.
When I first joined the University of Waterloo, I became part of an incredibly diverse and international research group with researchers from all over the world. It was a truly multicultural environment.
That was a culture shock for me, but it taught me a lot. Even ways of communicating that were normal in my country weren’t normal in another country. Ways of doing and communicating science were completely different. Even approaches to instrument maintenance were completely different. I started in an environment where you needed to learn a lot of theory and fundamentals before you could even go close to an instrument. But in Canada, I might be put in front of a broken instrument and asked to see if I could fix it.
I’ve learned that you need to be open-minded and very flexible in the way you think about scientific problems and interact with your peers. And, of course, you need to be resilient. There are going to be things that stop you, bring you down, or discourage you. But if you have your curiosity and your main aim in mind, you learn how to overcome them. And in the process of overcoming, you step forward. You learn something new that isn’t going to bring you down the next time something similar happens.
Something else I learned – and this has become very important now that I train my own students and the next generation of analytical scientists – is how to approach learning.
Every person is unique in the way they learn and approach problems. I try to leverage everybody’s capabilities and gifts to bring them toward the common goal of chemical analysis. You might have a student who is brilliant at troubleshooting. You may have another who is scared of an instrument but knows the fundamentals of that technique by heart.
You try to bring the team together to achieve a common research goal. I think being in different countries taught me how to bring together people with many different backgrounds and ways of thinking.
What skills will analytical scientists of the future need?
The main advice I give young scientists is: don’t become the analytical scientist who only pushes buttons without understanding what’s going on.
My generation has built its knowledge on the shoulders of giants who pioneered the analytical techniques, fundamental principles, and instrumentation we rely on today. I believe we have a responsibility to preserve that knowledge, build upon it, and pass it on to future generations of scientists.
I understand that, especially from a commercial perspective, the goal is to make analytical instruments as accessible and user-friendly as possible. And that’s a good thing. You don’t want to spend most of your day manually tuning an instrument when software can do it for you. However, it is essential to understand what the software is actually doing and how those adjustments affect your analytical performance, particularly sensitivity. Automation should simplify our work, not replace our understanding of the science behind it.
I think this understanding is what differentiates a true analytical scientist from an instrument user. Analytical scientists need to understand what’s happening from a fundamental point of view inside that instrument, because only that knowledge will allow you to interpret your data correctly. If there is a small shoulder on your peak, is something wrong with your chromatography? Is interference? Or could it be a compound you didn’t know was there and now need to investigate? That’s the type of curiosity that needs to drive younger analytical scientist, and it needs to be supported by good fundamental knowledge.
Really, it’s about cultivating an analytical chemistry mindset. I always like to tell my students to think like a molecule. What would you experience as a molecule in that instrument? How do you think a molecule would “feel” or “behave”? You’ll find that human behaviors are sometimes very similar to molecular behaviors, so you can correlate them.
You need to think like an analytical chemist if you want to do good-quality analytical chemistry. As educators, we need to cultivate that mindset early in the classroom and in the research laboratory.
